● Attenuation range: 0-60dB
● Direct output power control
● Working modes
● Output power control
● Absolute/relative attenuation setting
● Program (10 preset frequently-used attenuations)
● Adjust at step of 0.05/0.10/1.00/10.00 dB
● PC control via USB
● USB power charging
● Backlight
● Over 30 hours continuous operation
● Handheld, light and easy-to-use
● CE FCC certificates
OVA-50 Optical Variable Attenuator can precisely attenuate input optical signals at 1310/1490/1550/1625nm wavelengths and directly output defined stabilized optical signals. OVA-50 is applicable in various testing situations.
Application
● Network/BER testing
● Power meter calibration
● Link loss simulation
● Optical margin analysis
Direct Output Power Control
Normal attenuator can only introduce and display an attenuation value, you need a separate power meter to measure or adjust the output power value of attenuated optical signal. Working like a combination of attenuator and power meter, OVA-50 Output Power Control mode enables direct setting of precise optical power level and can automatically stabilize output level without any interference by variations of input power.
Program Mode
User can preprogram frequently-used attenuations to reduce workload.
Optical Variable Attenuator | OVA-50
Model
OVA-50
Wavelength Range
1260~1650nm
Calibrated Wavelengths
1310/1490/1550/1625nm
Fiber Type
9/125μm Singlemode
Attenuation Range
0 -60dB
Insertion Loss
<2.5dB
Max Input Power
+21dBm
Output Power Range (1)
+18 ~ -55 dBm
Setting Time
<3s
Display Resolution
0.01dB
Attenuation Accuracy
±0.25dB @+25℃ ( Output power control mode)
Repeatability
±0.25dB @+25℃
Return Loss
≥55dB
Connector
FC/PC (Interchangeable SC,ST)
Power Saving
Auto-off after 5 minutes idle
Backlight
Yes
Power Supply
Li-Ion Battery/AC Adaptor
Battery Life
Continuous operation >20 hours
Operating Temperature
0℃ ~ 50℃
Storage Temperature
-20℃ ~ 70℃
Relative Humidity
0~95% (non-condensing)
Weight
345g (0.7 lbs)
Dimensions (H × W × T)
177×80×44mm (6.97×3.15×1.73 inch)